- MODUL GENSET CONTROL
- BOWMAN EH 200 3401-3 Tank Exchangers-Heating Exchanger Aksesoris Mesin
BOWMAN EH 200 3401-3 Tank Exchangers-Heating Exchanger Aksesoris Mesin
Update Terakhir
30 / 07 / 2024
Min. Pembelian
1 Buah
Harga Mulai
Rp. 14.500.000
Rp. 14.500.000
Sampai dengan
Rp. 15.200.000
Rp. 15.200.000
Bagikan
Usaha kami berdiri sejak tahun 2011 terus tumbuh dan berkembang melayani kebutuhan barang Elektrikal ,Mekanikal dan jasa Instalasi,Wiring ,Commisoning ,Troubleshoting
Perhatian !
Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
Detail BOWMAN EH 200 3401-3 Tank Exchangers-Heating Exchanger Aksesoris Mesin
Header Tank Exchangers - Heating Exchanger
Introduction
These header tank heat exchangers can be used for marine engines as well as for various land based duties such as engine testing and development work, generator sets, fire pumps and combined heat and power systems. They incorporate a quiet zone header tank with a special deaeration feature and a pressurised filler cap. The removable tube stack is held in position by ‘O’ rings and is free to expand and contract within the cast housing, thus minimising thermal stresses. It can easily be removed for cleaning if necessary. Bowman manufacture a large range of header tank heat exchangers. There is a choice on the raw water side of single pass, two pass and three pass heat exchangers for different flow rates. There are also different end cover materials depending on whether the heat exchangers are used with fresh water, sea water or contaminated water. Bowman header tank heat exchangers can be selected from our technical program if the following information is supplied:
Tampilkan Lebih Banyak
Introduction
These header tank heat exchangers can be used for marine engines as well as for various land based duties such as engine testing and development work, generator sets, fire pumps and combined heat and power systems. They incorporate a quiet zone header tank with a special deaeration feature and a pressurised filler cap. The removable tube stack is held in position by ‘O’ rings and is free to expand and contract within the cast housing, thus minimising thermal stresses. It can easily be removed for cleaning if necessary. Bowman manufacture a large range of header tank heat exchangers. There is a choice on the raw water side of single pass, two pass and three pass heat exchangers for different flow rates. There are also different end cover materials depending on whether the heat exchangers are used with fresh water, sea water or contaminated water. Bowman header tank heat exchangers can be selected from our technical program if the following information is supplied:
